Millipore APC ErgoTouch Pro 2, Руководство по эксплуатации

Страница: 11 / 36

11
3 Operation
The Model APC ErgoTouch Pro 2 Handheld Airborne Particle Counter is controlled using a touch screen display.
Use the plastic stylus or your finger tip. DO NOT use sharp objects (such as a pen point) that may damage the
screen overlay.
To turn on the instrument, press the
on/off button
(located in the center of the front of the instrument).
After a splash screen displays the logo, a brief start-up
sequence begins as the Windows® CE operating system
boots up.
The instrument is ready for operation when the main
tab shown on the side appears. If an optional tem-
perature/humidity probe is attached, those values will
be shown in the upper-left corner also.
Screen Layout and Functionality
There are four main screens (tabs): Main, Setup, Data, and Reports. The operation of each of these screens, the
information displayed on them, and the operations you can perform from each are described in the remainder
of this chapter.
Some screens require or allow you to enter information. To enter information, tap on the screen and an
on-screen keyboard appears.
Software Input Panel (Keyboard)
Throughout the setup screens, a keyboard will appear
on the screen when text may be entered. Data may be
entered using this keyboard. When the entry is com-
plete, press either the
Enter or Esc keys. The keyboard
will then be hidden until another text entry box is
selected.
Main Tab
The Main Tab is the default screen. The left side of the screen summarizes the concentrations for the currently selected location.
Tap on the size and count portion of the screen to enable Zoomed Data Screen (see Setup Tab).
The display shows:
• Temperature*
• Relative humidity*
• Bin sizes
• Particle count/concentration
*Temperature and Humidity are displayed only if the optional T/H probe is installed.