Millipore APC ErgoTouch Pro 2, Руководство по эксплуатации

Страница: 15 / 36

15
Change Setup Password Screen
If a Setup password has been previously set, you must
enter that password before being allowed to change
the Setup password. If a Setup password is set, click-
ing on the setup tab at the bottom of the main screen
brings up a password screen. That password must be
entered in order to change instrument settings.
Tap on the screen to display the on-screen keyboard
end enter the required information.
Field Description
Old Password Enter your existing password (if one has already been set) or leave blank.
New Password Enter a new password The password can be any length and use any characters.
Confi rm New Password Retype the new password then press OK. A confi rmation message appears if the
password is changed.
NOTE
Leave both New Password and Confi rm New Password fi elds blank to turn off password protection.
Call us if you have forgotten your password.
Configuration Screen
Use this screen to set configuration parameters.
Press OK when finished.
Field Description
∆ and ∑ on Zoom Select to zoom in on both cumulative (∑) and differential (∆) counts on the Main Tab.
To zoom the Main Tab, select on the left side of the Main Tab. (It takes a moment
for the screen to update.) Click on the screen again to return to normal view.
Store Partial Samples When selected, stores the partial record in the current database if the instrument
is stopped during a sampling period.