Miller MigMatic 300, Руководство пользователя

Страница: 29 / 72

OM-251958 Page 23
5-2. Controls For MigMatic 380
Ref. 956142845_2_14_A / 356029237_C
12
1
2
3
4
5
6
7
8
10
9
11
13
1 Power Switch S1
Use switch to turn power on and off.
2
Voltage Range Control S2
Allows selection of voltage in three
coarse ranges, A, B or C.
3
Voltage Adjustment Control S3
This control allows for 10 voltage
settings in each of the three coarse
voltage ranges (A, B or C) of S2.
4
High Temperature Shutdown
Light PL2 (Orange LED)
PL2 lights up when unit overheats
and shuts down.
5
Power Indicator Light PL1
(White LED)
PL1 is lit when power is On.
6
Wire Feed Speed Control R1
Turn control clockwise to increase
wire feed speed.
This control will also allow
adjustment of sequencer
parameters (see Section 5-4).
7
Digital Display Meter
Displays values and parameters for
selected welding processes.
8
Setup Button
Use button to select parameters (V,
A, %) and the sequencer control.
9
Sequencer Control LEDs
See Section 5-4.
10 Trigger Mode Button
Use control to select desired trigger
mode (see Section 5-5).
11 MIG Torch Connection
Connection for Euro style MIG gun.
12 Low Inductance Negative (
− )
Weld Output Terminal
Connect work lead here for most
short arc applications.
13 High Inductance Negative (
− )
Weld Output Terminal
Connect work lead here for stainless
steel and spray arc applications.