Miller MigMatic 300, Руководство пользователя

Страница: 40 / 72

OM-251958 Page 34
5-13. Trigger Mode Selection (DX Models Only)
.
Always select a trigger mode.
1 2-t Trigger Mode
When trigger is pressed welding starts.
When trigger is released, welding stops.
2
4-t Trigger Mode
When trigger is pressed, welding starts.
When trigger is released, welding contin-
ues. When trigger is pressed and released
a second time, welding stops.
3
Trigger Mode Selection Button
Press button to select desired trigger mode
and lite corresponding LED.
.
2-t and 4-t trigger methods work in both
manual and synergic modes.
1
2
3
5-14. Welding Wire Diameter Selection For Synergic MIG (DX Models Only)
1 Welding Wire Diameters
2 Welding Wire Diameter
Button
Press button to select desired wire
diameter: 0.6 mm, 0.8 mm, 1.0 mm,
or 1.2 mm, and lite corresponding
LED.
1
2