Miller DYNASTY 350, Руководство пользователя

Страница: 63 / 136

OM-216 869 Page 57
SECTION 6 − ADVANCED FUNCTIONS
f
6-1. Accessing Advanced Functions
1 Amperage Switch Pad
2 Gas/Dig
3 Encoder Control
To access the advanced functions, press
and hold the Amperage (A) switch pad and
then press the Gas/Dig switch pad. To
scroll through the advanced functions,
press and release the Gas/Dig switch pad.
Use the Encoder control to change param-
eters for each function.
Advanced Functions:

Programmable TIG Start Parameters
(see Section 6-2) − Allows you to set
tungsten size, amps, time, polarity, and
preset amperage minimum to customize
arc starts for different tungstens.

Output Remote Hold And Trigger Func-
tions (see Section 6-3) − For reconfigur-
ing RMT 2T Hold for 3T, 4T Momentary,
or Mini Logic

AC Waveshape Selection with Dynasty
models only (see Section 6-4) − Allows
you to set a soft, sine, triangle, or ad-
vanced AC waveshape for each memory
location if desired.

Independent Amplitude Selection with
Dynasty models only (see Section 6-5) −
Allows you to set the amplitude of the AC
waveshape equal for both the positive
and negative half of the weld cycle, or
have independent settings.

Spot Enable (see Section 6-6) − Allows
you to turn the spot function on and be
available for all programs.

Stick OCV Selection (see Section 6-7) −
Allows you to select either low or normal
OCV (open circuit voltage).

Stick Stuck Check Selection (See Sec-
tion 6-8) − With Stick Stuck Check on and
the welding electrode (rod) stuck, output
is turned off in an attempt to save the rod
for reuse.

Lockout Functions (see Section 6-9) −
Allows you to turn the lockout function on
and off and adjust the lockout levels.

Meter Displays (see Section 6-10) − Al-
lows you to set meters to display weld
voltage and amperage, or blank meters
while pulse welding. Also allows you to
select amperage preset of peak or aver-
age amperage for DC TIG pulse.

DC Meter Calibration (See Section 6-11)
− Allows voltage/amperage calibration of
DC meter.
To exit advanced functions, press and hold
the Amperage (A) switch pad and then
press the Gas/Dig switch pad.
1
2
3