Miller Bobcat 225 NT, Руководство пользователя

Страница: 24 / 74

20
OM-405
6.2 Optional Auxiliary Power Receptacles
If unit does not have GFCI re-
ceptacles, use GFCI-
protected extension cord.
Auxiliary power decreases as
weld current increases.
Set Fine Adjust control R1 at 10
for full auxiliary power.
Combined output of all receptacles
limited to 8 kVA/kW rating of the
generator.
GFCI Receptacle Option
1 120 V 15 A AC GFCI Recep-
tacles GFCI2 and GFCI3
GFCI2 and GFCI3 supply 60 Hz
single-phase power at weld/power
speed. Maximum output from
GFCI2 or GFCI3 is 2.4 kVA/kW.
Circuit breaker protection is the
same as standard receptacles.
If a ground fault is detected, the
GFCI Reset button pops out and
the circuit opens to disconnect the
faulty equipment. Check for
damaged tools, cords, plugs, etc.
connected to the receptacle. Press
button to reset receptacle and
resume operation.
At least once a month, run
engine at weld/power speed
and press Test button to verify
GFCI is working properly.
South African And Australian
Receptacle Options
2 240 V 16 A AC South African
Receptacles RC1, RC2, and
RC3
3 240 V 15 A AC Australian Re-
ceptacles RC1, RC2, and
RC3
Receptacles supply 60 Hz single-
phase power at weld/power speed.
Maximum output from each
receptacle is 3.6 kVA/kW.
4 Circuit Breakers CB1, CB2,
CB3
CB1, CB2, and CB3 protect RC1,
RC2, and RC3 from overload. If a
circuit breaker opens, the recep-
tacle does not work.
5 Circuit Breaker CB4
CB4 protects all the receptacles
from overload. If CB4 opens, none
of the receptacles work.
Press button to reset circuit
breaker. If breaker continues to
open, contact Factory
Authorized Service Agent.
1
2
4
5
3
4
5
Ref. ST-183 175-A / Ref. ST-172 782-A / Ref. ST-172 113