Miller AG-BAG G6060, Руководство оператора

Страница: 28 / 90

22
3. Lower the jack stand next to the hydraulic reservoir down to the ground. Pin the jack stand
in this position using the upper most hole. Be sure to insert the pin completely and secure in
place.
4. Crank the lift jack up until the wheel at the front of the bagger lifts off the ground.
5. Pull the retaining pin and remove the wheel assembly from the mounting socket.
6. Crank the lift jack down to gain clearance for the wheel assembly to be inserted into the socket
at the left side of the bagger.
7. Insert the wheel assembly into the socket located next to the tow hitch on the left side. Insert
the retaining pin and secure the pin in place with the hair pin.
Wheel Assembly
Jack Stand
Hydraulic
Reservoir
Left Wheel Socket
Tow Hitch