Miller AG-BAG G6060, Руководство оператора

Страница: 21 / 90

15
Assemble Bag Pan
1. Place the bag pan under the tunnel. Line up the holes in the bag pan mounts with the mount-
ing holes in the bag pan tabs under and to the backside of the tunnel. Be sure the bag pan
mounts are to the outside of each mounting tab under and to the backside of the tunnel.
Insert the 5/8 x 2-1/2” pivot bolts through the bag pan mounts and the mounting tab holes. Se-
cure the bag pan pivot bolts in place with 5/8”
flat washers and 5/8” locknuts. DO NOT tighten
the hardware completely, bag pan must pivot freely.
2. Lift the bag pan up and assemble the short bungee cords between the hooks on each side of
the bag pan and the hooks on the frame on each side of the tunnel. Be sure to assemble both
bungee cords.
Bag Pan
Tunnel
Bag Pan
Mount
Bag Pan
Short Bungee Cord