Miller AG-BAG G6060, Руководство оператора

Страница: 30 / 90

24
Hook Tractor To Tow Hitch
1. Crank the lift jack up or down to make the tow hitch match up with the tractor drawbar.
2. Back the tractor up to the tow hitch, be sure the tractor is in a straight line with the bagger.
Line up the hitch pin holes in the tractor drawbar and bagger hitch and insert the hitch pin and
hair pin.
IMPORTANT: When operating the bagger to fill the storage bag, the tractor and bagger must
be in a straight line to create a straight bag.
3. Raise the lift jack until the base is off the ground. Rotate the jack 90° and reassemble to the
tow hitch with the retaining pin and hair pin.
Assemble PTO Shaft To Bagger and Tractor
1. Remove the PTO shaft from the transport location between the front of the hopper and the rest
attached to the cable drum mount.
2. Lift the gearbox shaft guard up out of the way. Be sure to lower the guard down to the operat-
ing position once the PTO shaft is assembled.
Gearbox Shaft
Guard Raised
PTO Shaft
In Transport
Location
Lift Jack In Stowed Position