Miller AG-BAG G6060, Руководство оператора

Страница: 63 / 90

57
Rotor Drive Chain
Tension Check and Adjustment
WARNING
DO NOT lubricate, adjust and/or service this machine unless the POWER
SOURCE SHUT DOWN PROCEDURE (page 5) has been exercised.
The tensioner for the rotor chain is spring loaded. Check to be sure the tensioner is maintaining
proper tension on the chain.
1. Remove the rotor drive chain guard from the side of the frame. Check and adjust spring ten-
sion as follows:
a. Check the spring to see if the spring is maintaining pressure on the chain (spring slightly
stretched).
b. If spring tension needs to be increased, loosen the lower nut on the threaded adjustment
rod and tighten the upper nut to increase tension.
c. After adjustment is complete, retighten the lower nut against the adjustment bracket.
WARNING
DO NOT operate the bagger unless all guards are secured in place. Moving
parts inside could cause serious injury or death.
2. Place the rotor drive chain guard back on to the frame and secure in place before operating
the bagger.
Upper Nut
Lower Nut
Threaded
Adjustment
Rod
Rotor Drive
Chain Guard