Miller Electric SWLL-115, Руководство пользователя

Страница: 16 / 24

OM-1597 Page 12
2-6. Plug Connections
DP-0001 / 802 269
1 Weld Control
2 Motor Control Cord (Not
Supplied)
3 Motor/Drive Assembly
To make connections, align key-
way, insert plug, and tighten
threaded collar.
1
2
3
2-7. Threading And Feeding Welding Wire
Ref. ST-153 072 / Ref. ST-156 798
Tools Needed:
WOOD
POWER
ON
OFF
6 in
(150 mm)
Hold wire tightly to keep it
from unraveling.
WIRE ADVANCE
V
Weld Control Welding Power Source
Set switches.
Pull and hold wire; cut off end.
Push wire thru guide up to drive rolls; continue to
hold welding wire. Press Wire Advance push but-
ton until drive rolls grab wire. Adjust tension until
wire does not slip. Indicator is for reference only. Press Wire Advance push button until
wire comes out of gun. Feed wire to
check drive roll pressure. Adjust knob
enough to prevent slipping. Do not over-
tighten.
Cut off wire at a diagonal.
Close cover.