M.I. P/N 004-2163 Rev. C
40
Cables and Connectors
ECG cable – unterminated
Millar offers ECG cables with tinned-wire terminations so that a user can attach any style
of ECG connector desired.
850-5123 10-foot ECG cable with tinned-wire terminations
ECG input connector
Users may construct their own ECG cable. The required connector is available from the
manufacturer and some distributors.
Strain Relief
Lemo/Redel part number 1B.054,DV
Connector
Lemo/Redel part number PAG.M08Gl.AC65GZ
Equipotential cable
The ground post on the rear panel is compliant with the DIN 42801 standard. Multi-
Contact offers products that are designed to connect to this type of connector.
www.multicontact.com
BNC Cables
Standard BNC cables are required for connecting to the outputs of the MPVS
Ultra
. BNC
cable quality is important for ensuring clean signals, so be sure to use coax cables with a
braided copper shield. Millar offers high-quality BNC cables in three lengths. Most
electronics distributors offer BNC cables as well.
249-7118 3-foot BNC cable
850-5126 1-foot BNC cable
850-5125 9-inch BNC cable
880-0169 MPVS
Ultra
cable pack, 10-foot
880-0170 MPVS
Ultra
cable pack, 4-foot
880-0171 BNC cable pack, 13 × 3-foot
880-0172 BNC cable pack, PowerLab User
Connector for temperature input
In order to connect to the Cuvette input for temperature recording, use one of the following
connectors. They are available from the manufacturer and some electronics distributors.
ODU,
www.odu-usa.com
or
www.odu.de
Connector, part number S21M07-P07MFG0-657S
Strain relief, part number 701023207965050
Redel,
www.lemo.com
Technical Specifications
