M.I. P/N 004-2163 Rev. C
34
If necessary, the fuses can be replaced by removing the drawer on the rear panel. It is
located between the power switch and the power input connector. Use the fuse type
indicated on the rear panel.
Other than the fuses, the MPVS
Ultra
has no user-serviceable parts. Do not open the
enclosure or any cable connectors. Contact Millar or your distributor for service.
Cables
The cables can be wiped with isopropyl alcohol (70%).
Do not submerge the cables or cords.
When connecting and disconnecting the cables and cords:
Be sure that none of the cables (including the power cord) are frayed, cut, or cracked. All
cables should connect firmly to the system.
All except for the USB and power cords lock in place when properly connected.
Be sure that none of the cables or cords is bent sharply as this may damage the internal
wires.
Theor
y
of Operation
