Milestone DecalMATE, Руководство оператора

Страница: 42 / 80

DecalMATE MM112-003 - Operator Manual
42
After checking the samples on the blue plastic area (see chapter 3.2.3) select:
“Run completed”: Decalcification completed then the process
will end and you can proceed with the discharge of the reagent
(reagent Unload).
or
“Go back to the decalcification”: the samples are not
completely decalcified and then restart the process by
downloading the "Water rinsing 2" and reloading the
decalcification (Decalcification Nr.2).
It is possible to repeat this operation until 5 times.
At every restart of decalcification, the name of the phase will
change as Decalcification nr.2, Water rinsing 2 Nr.2,
decalcification nr.3, Water rinsing 2 nr.3, etc.
If you decide to return to decalcification ("Go back
to the decalcification"), it may see a red symbol
on the icon of the reagents.
This indicates that the reagent in use has expired
in the meantime, but the process will not be
blocked.
At the end of Water rinsing nr.6 you can select "Run completed".
If the "Check status" is not done immediately, the samples are kept in "Water rinsing 2" up to their control.
This period is identified with the name of "EXTRA TIME".