Milestone 372700, Руководство оператора

Страница: 31 / 108

MacroVIEW MM179-001 - Operator Manual
31
3. USE OF MacroVIEW
Working with MacroVIEW is a very easy and user friendly. All functions are described in the following
chapters.
Before you can turn on the PC, you need to turn on the trolley by pressing the specific button, as shown in
the following image. Refer to chapter 3.8 for the explanation of the panel shown in the following picture.
3.1. Start MacroVIEW
Follow the instructions below;
Switch on the PC by pressing the button on the front panel, as indicated in the figure below.
Turn on the camera with the appropriate button found at the back of the unit, indicated by the arrow in the
following picture.
The camera must be switched on AFTER having switched on the PC and the software
accessed only after the camera is on.
To switch off, carry out the same sequence as above in the opposite order: switch off the
software, switch off the camera and shutdown the PC.
It is advisable to not only turn off the PC but also the entire system, once a day (chapter
3.8).
This button only allows you to switch on the PC; DO NOT to switch it off (execute the
Windows procedure to shutdown).