76
PTZ Limit
The PTZ camera can be programmed to move within the configurable PTZ Limits(Left/Right).
Figure 4-5-38 PTZ Limit
Step1: Check the checkbox to enable the PTZ Limit function.
Step2: Choose the limit mode as Manual limit or scanning limit.
Manual Limit:
When Manual limit stops are set, you can operate the PTZ control panel manually only in
the limited surveillance area.
Scan Limit:
When Scan limit stops are set, the auto scan is performed only in the limited surveillance
area.
Step3: Click the PTZ controller buttons to set the left/right limit stops; you can also call the defined
presets and set them as the limits of the PTZ camera.
Step4: Click
Set
to save the limits or
Clear
to clear the limits.
Initial Position
You can configure the Initial Position for Mini PTZ Bullet as a zero point.
Step1: Click the PTZ control buttons as the Initial Position of the Mini PTZ bullet,you can also call a
defined preset and set it as the Initial Position.
Step2: Click Set to save the position as the Initial Position.
Figure 4-5-39 Initial Position interface
Содержание MS-C2942-B
Страница 1: ...PTZ Network Camera User Manual V2 08 ...
