53
Figure 4-5-4 Alarm Settings
Table 4-5-3 Description of the buttons
Parameters
Function Introduction
Record Video Sections
Six different periods are available(5, 10, 15, 20, 25, 30 sec).
Pre-record
Reserve the record time before alarm, 0~10 sec.
Snapshot
The number of snapshot, from 1 to 5.
Snapshot Interval
It cannot be edited unless you choose more than 1 to Snapshot.
External Output Action
Time
Length of time an alarm lasts, this cannot be edited unless when you enable
the External Output on the Alarm Action firstly.
Audio Action Settings
Set the audio schedule to trigger different audio files and action times in
different time, which is corresponded to alarm action.
Play Audio Interval
Auto/ 10 seconds/ 30 seconds/ 1 minute/ 5 minutes/ 10 minutes are available.
White LED Flash Mode
Twinkle:
The White LED will continuous flashing before recovered;
Always:
The White LED will always open before recovered.
White LED Flash Time
The duration of flash.
Twinkle from 1 second to 10 seconds;
Always from 1 second to 60 seconds.
Proportional Zoom Times
Support to zoom proportionally when PTZ Motion is triggered.
PTZ Motion Recovery
Time
The duration of one alarm. It must be longer than flash time.
Содержание MS-C2942-B
Страница 1: ...PTZ Network Camera User Manual V2 08 ...
