23
Figure 4-1-6 Call a Patrol
Note:
The three buttons behind the Patrol list means: Play, Set and Delete.
Set / Call a pattern
A pattern is a memorized series of pan, tilt, zoom and preset functions. It can be called on the
pattern settings interface. There are up to 4 patterns can be set.
Set a pattern:
Step1: In the PTZ control panel, click
to enter the pattern settings interface;
Step2: Select a pattern number from the pattern list as shown in Figure 4-1-7;
Figure 4-1-7 Set a Pattern
Step3: Click
to activate recording the panning, tilting and zooming actions;
Step4: Use the PTZ controller buttons to move the lens to the interested position;
Step5: Click
to save all the pattern settings.
Note:
The percentage of number on the OSD is the remaining space of pattern. Start with 100% and run
out of 0%.
Call a pattern:
In the PTZ control panel, select a defined pattern from the pattern list, click
to call the pattern,
as shown in Figure 4-1-8.
Содержание MS-C2942-B
Страница 1: ...PTZ Network Camera User Manual V2 08 ...
