24
Level Appliance in Hearth
The backside of each support leg has a leveling bolt. If
necessary, adjust the level of the fi rebox in the hearth.
Re-install Burner Module
Note: If the circulating fan is to be installed it
should be done at this point before installing the
burner module. See instructions packaged with the
fan for details of the fan installation.
Reinstall the burner module using the 4 screws
removed previously.
Leveling
bolt
Front View
Side View
Fret bracket
Leg
Leveling bolt
Back
Front
Leveling
bolt
Installation
Remove top baffl e
if necessary to gain
space for a screwdriver
(2 screws)
Re-install top baffl e if
removed (2 screws)
Edge fi ts into cleat at
back of fi rebox
Re-install Burner
Module (4 screws)
Re-install
Log Support
(4 screws)
Note:
The upper baffl e may be removed to gain more
room for the screwdriver to install the rear screws.
Connect Gas Line and Test Appliance
Connect the gas line to the burner module. Check
for leaks, purge the line, and test-fi re the unit before
installing the window or proceeding with the remainder
of the install—see
Connect Gas Supply
section.
Re-install Top Baffl
e (if removed)
Re-install Log Support
QUALIFIED
INSTALLER
