Mikrofill Ethos RS 350, Техническая документация инструкция

Страница: 25 / 44

OPERATING INSTRUCTIONS
TECHNICAL DOCUMENTATION 25
INFORMATION DISPLAY:
DHW OPERATION
• DHW Mode can be enabled or disabled by using the button.
• The DHW setpoint can be increased or decreased by using the buttons.
HEATING OPERATION
• Heating Mode can be enabled or disabled by using the button.
• The CH setpoint can be increased or decreased by using the buttons.
DISPLAYING INFORMATION
• The installer menu can be accessed by pressing and holding for three seconds.
• The parameter number will then be displayed, followed by the value.
• The next parameter can be viewed by utilising the buttons.
TABLE PARAMETER LIST
RESET
RESET
BAR
INDEX
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
P14
P15
P16
P17
VARIABLE
Flame Current
CH Supply Temperature
CH Return Temperature
DHW Temperature
Water Pressure
Output Level
Requested Fan Speed
Actual Fan Speed
Exhaust Temperature
Cascade Temperature
OTC Temperature
Cascade Modulation Level
CH Control Setpoint
DHW Control Setpoint
Total Burners
Total Burners On
Total Displays
UNIT
[μA]
[°C -or- °F]
[°C -or- °F]
[°C -or- °F] (only on MAXSYS0, if used)
[bar/10 -or- psi] (local MAXSYS0, where sensor is connected)
[rel. %] actual relative output level of the burner
[50*rpm] speed requested by control algorithm
[50*rpm] fan speed
[°C]
[°C -or- °F] if cascade sensor is connected
[°C -or- °F] temperature from external sensor
[rel. %] relative modulation level of cascade
[°C -or- °F]
[°C -or- °F]
total count of installed burners
count of burners running
total count of boiler modules