12
8
．
OPERATION
Set the fuel cock lever to the “ON” position
to let the fuel flow. (Fig. 6)
In cold weather or when the engine does
not start easily, set the choke lever to the
“Start” position. This is not necessary when
the engine is already warmed up. (Fig. 7)
1
2
8.1 Starting
Gasoline Engine
Fig. 5
Lock lever
Fuel tank cap
※
Only for HATZ engine
①
②
③
Put your finger at the lock lever
to pull it up towards you.
Unlock the lock lever.
Put your fingers to the tabs at
the two locations of the tank
cap to pull up towards you.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
“ON”
Fuel cock lever
Stop the engine when refueling.
Do not expose to open flames while refuel-
ing.
Do not fill to the rim because the fuel might
spill.
Wipe off well if a spill occurs.
Use clean automotive gasoline or automotive
light oil appropriate for the engine. Let the
fuel run through a filter when refueling.
Fuel inlet is located under the rubber cover
at the front cover top portion.
The fuel tank cap is equipped with a lock
lever. Unlock this lever before opening the
cap. (Only for HATZ engine)
(Fig.5)
●
●
●
●
●
●
●
7.3 Refueling
DANGER
！
Choke lever
“START”
HONDA (GX160,GX200)
HONDA (GX160,GX200)
Move the throttle lever to the idle position.
(Fig. 8)
When the engine is stopped, the hour
tachometer is always showing "Cumulative
time".(Fig.9)
3
4
If the engine cannot be started, open the
choke a little so as not to flood the carbure-
tor.
CAUTION
！
Idle position
Throttle lever
ENGINE TACH
HOUR
&
METER
HRS
TP-22
