background image

2

3

WARNING SIGNS

4

CAUTIONS FOR SAFETY

The triangle shaped       marks used in this manual and on the decals stuck on the main body 

indicate common hazards. Be sure to read and observe the cautions described. 

Do not work with this machine, when

 

Please read the operation manual well and work safely by using the machine properly.

For handling of the engine, please refer to the separate engine operation manual.

Please have a good understanding of the structure of this machine.

Make sure to do work start inspection, regular self inspection and specified self inspec-

tion.

To make your work safe, please use protective equipment (use specified helmet, pro-

tective shoes, etc.) and wear appropriate work clothes.

Always use noise protection equipment such as ear muffs or ear plugs.

Always check the machine to make sure it is in normal condition before operating the 

machine.

The nameplates attached to the machine (nameplates showing operation method, 

warning, etc.) are very important for your safety. Clean the machine so that the name-

plates can be read easily. If it is difficult to read the nameplate, please replace the old 

one with a new one.

It is dangerous for young children to come near the machine. Please pay careful atten-

tion to the method of storing and the storage location for this machine. Especially the 

engine start key has to be taken out every time you finish your work, and keep it in a 

designated location.

To do maintenance work, stop the engine and remove the battery wiring.

We are not responsible for accidents that have occurred after the machine was refur-

bished without approval from the manufacturer.

you are tired or sick and not feeling well, 

you have taken medicine or drug, or 

you have had a drink.

4.1 General Cautions








Warning labels indicating hazards to humans and to equipment.

DANGER

WARNING

CAUTION

CAUTION

Denotes an extreme hazard. It calls attention to a procedure, practice, 

condition or the like, which, if not correctly performed or adhered to, is 

likely to result in serious injury or death.

Denotes a hazard. It calls attention to a procedure, practice, condition 

or the like, which, if not correctly performed or adhered to, could 

result in serious injury or death.

Denotes a hazard. It calls attention to a procedure, practice, condition 

or the like, which, if not correctly performed or adhered to, could 

result in injury to people and may damage or destroy the product.

Failure to follow the instructions may result in damage to property.

 (without at     )

WARNING

CAUTION

Содержание 455115





























Отзывы: