Mikado LOGO 400, Руководство пользователя

Страница: 8 / 54

Manual LOGO 400 Page 8 ©Mikado Modellhubschrauber
2x M3x12 #1954
2x 3x9x1 #2011
3 Motor Installation
3.1 Motor Attachment
Bag 1 • Bag 12
When installing the motor, tighten
the socket head cap screws only
slightly, making sure that the motor
can still be moved on the motor
plate.
Do not tighten the set screw fully until
the final position of the pinion on the
motor shaft is determined. This is
done after installing the main gear.
There are two options for attaching
the pinion:
1. For securing the pinion, you may
flatten the motor shaft where the set
screw meets the motor shaft - without
making a flat surface on the motor
shaft.
2. Alternatively, you may screw the
set screw directly onto the motor
shaft. For this it is required that the
set screw has an appropriate rim for
engaging the motorshaft (all Mikado
pinions have this rim). Note, however,
that after attaching the set screw
once, the rim becomes blunt and may
not be used again.