Mikado LOGO 400, Руководство пользователя

Страница: 24 / 54

Manual LOGO 400 Page 24 ©Mikado Modellhubschrauber
#4003
8 Servo Installation
8.2 Elevator Servo
For determining the best position
for the elevator servo, place the servo
against the chassis and mark the at-
tachment holes with a pen or needle.
Then drill where you have made the
markings.
Swashplate servo installation
When microservos
are used, the linikages
should be aligned as
close as possible to
vertical.
When using larger ser-
vos the linkages should
be aligned as close as
possible to vertical or
have the same angle.
Incorrect! Incorrect!
8.3 Elevator Linkage/Swashplate