Mikado LOGO 400, Руководство пользователя

Страница: 45 / 54

Manual LOGO 400 Page 45 ©Mikado Modellhubschrauber


14 Rotor Blades
Balancing of Rotor Blades (Center
of Gravity)
Place each rotor blade over an
edge as shown in picture (1). Adjust
the blades so that they are in equi-
librium. If the center of gravity is not
in the same place in each blade, this
needs to be corrected using tape.
Apply as much tape as necessary
until both blades show their center
of gravity in the same place.
Static balancing
Screw the rotor blades together
as shown in picture (2). The rotor
blades are properly balanced when
they are suspended exactly horizon-
tally. If one of the rotorblades is not
exactly horizontal, the blades are not
in equilibrium.
This is corrected by applying tape
to lighter blade.
When mounting the rotor blades
to the blade holders, note the proper
direction (clockwise rotation). Tighten
the cap screws holding the rotor bla-
des, so that the blades cannot move
easily in the blade holders.