Mikado LOGO 400, Руководство пользователя

Страница: 23 / 54

Manual LOGO 400 Page 23 ©Mikado Modellhubschrauber
3x M2x8
1x M2x10
5x M2 #2070
4x 4,8 #1570
14-15 mm
18-20 mm
7 Preparation for Servo Installation
7.3 Servo Arms
Bag 9
7.4 Servo Centering
Now you must decide which pitch
range you wish to use. For different
flying styles, different pitch ranges
must be used. For normal flight with
some aerobatics, choose standard
settings and connect the push rod
at the 18 mm hole on the servo arm.
For 3D flight use 20 mm distance
instead. The ball for the tail-rotor
servo arm should be attached with a
distance of 14-15 mm from the servo
arm center.
Connect the servo wires to the
receiver and set all channels in your
transmitter to neutral. Now attach
the servo arms perpendicular to the
servos.
120° CCPM
Rudder Servo Elevator Servo Aileron Servo left Aileron Servo right
Rudder Servo 3D
8 Servo Installation
8.1 Tail Rotor Servo
With LOGO 400 side-frames you
can use two different sizes of tail
rotor servos. A larger standard-size
tail rotor servo can be mounted to the
left side-frame, a smaller mini servo
is mounted to right side-frame.