MM260 Installation Instructions
ix
Product identification label (1)
installed under rear mount on arm.
Logo and warning labels (2) installed on each side of
opener housing
Control box label (1) installed on front of control box
260
®
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
Maximum Gate: 300 lbs. (136.1 kg); 12 ft. (3.7 m) • Voltage: 12 Vdc;
Frequency: 0Hz; Power: 25W • Class I Vehicular Swing Gate Operator
TO MANUALLY OPEN AND CLOSE THE GATE
1. Turn opener power switch OFF.
2. Disconnect front or rear mount from mounting bracket.
3. Pull opener away from mounting bracket and move gate.
Disconnect opener ONLY when the power switch is
OFF and the gate is not moving.
®
www.mightymule.com • 800-543-4283
MMDDYY
GTO Access Systems, LLC - Tallahassee, Florida USA
MM200 SERIES
DC Swing Gate Operator
P/N MM260
Conforms to UL STD 325
Certified to CSA STD C22.2 No.247
Class I Vehicular Gate
S/N:
MM260-0000000
9901178
Important Safety Information
These warning labels should be found at the locations specified below. If any of them are missing, immediately
contact GTO for replacements.
Required Safety Precautions for Gates
