Miele TXR 860 WP Скачать руководство пользователя

Страница: 90 / 100

Settings

You can alter the tumble dryer’s
electronics to suit changing
requirements with the settings.
The settings can be altered at any
time.

Calling up settings



Switch the tumble dryer on.



Scroll to the second page in the main
menu.



Touch the

Settings

sensor button.

Selecting settings

The settings are grouped into different
areas.



Select the required area.



Scroll through the list until the setting
you want appears.



Touch the sensor to select the setting
you require.

Changing a setting



Change the value displayed and
confirm with



Touch an option to select it.

An option which is selected will be
highlighted orange.

The option is saved. The display will
then switch to the Settings menu, or go
back to the previous menu level.

Closing the Settings menu



Touch the



sensor button.

The display will then go back to the
previous menu level.



Touch the



sensor button.

The display will change to the main
menu.

Содержание TXR 860 WP





































































































Результаты поиска

Содержание TXR 860 WP

Отзывы:

Похожие инструкции для TXR 860 WP

Бренды по названию

Популярные бренды

Miele TXR 860 WP, Руководство по эксплуатации

Результаты поиска

Содержание TXR 860 WP

Отзывы:

Похожие инструкции для TXR 860 WP

Бренды по названию

Популярные бренды