5. Starting a program
30
Starting a program
The program can be started when the
Start/Stop
sensor button is flashing on
and off.
Touch the
Start/Stop
sensor button.
The
Start/Stop
sensor button lights up
constantly.
11:02
Status
Normal
Time left
Machine Iron
PerfectDry
h
1:42
Add laundry
Drying
and the program duration
remaining will light up in the display.
The laundry will be cooled down shortly
before the end of the program.
Useful tip:
In the pull-down menu, you
can view the selected drying level or
duration and the energy consumption.
With programs with a selectable drying
level,
PerfectDry
calculates the residual
moisture present in the laundry to
ensure precise drying results. However,
if you load the dryer with little or dry
laundry, it will be dried / aired for a set
duration.
The
PerfectDry
display will only light up
with programs with selectable drying
levels:
- hollow point
after a program has
started
The drying level reached will still be
shown later on.
- solid point
when the drying level is
reached
The time left for the drying level
programs can vary or “jump”. It
depends on the load quantity, type of
laundry, residual moisture in the
laundry, or water hardness.
PerfectDry
continually adapts, constantly
increasing the accuracy of the time left.
Avoid over-drying laundry and
garments.
Otherwise they can wear out!
Energy savings
After 10 minutes, the indicators dim and
the
Start/Stop
sensor button starts
flashing.
Touch the
Start/Stop
sensor button to
switch the indicators on again (this
does not have any effect on a running
program).
The drum lighting switches off once the
program has started.
Adding laundry
You can add laundry after the program
has started.
Follow the description in “Changing
the program sequence – Adding or
removing laundry”.
Содержание TXR 860 WP
Страница 100: ...M Nr 11 677 050 01 en CA TXR 860 WP ...