Initial commissioning
23
Useful tip:
To postpone setup until
later: touch the
Skip
sensor button. The
following message will then appear in
the display:
It is possible to set up later in “Settings” /
“Miele@home”.
Confirm with the
OK
sensor button.
Via WPS
Via App
Which connection method do you
want to use?
Select the connection method you
wish to use.
You will then be guided by the display
and the Miele@home app.
You will require a WPS-compatible
router for the
Via WPS
connection type.
Activate the WPS function on your
router within 2 minutes.
Setting the clock format
The time of day can be displayed in 12-
hour or 24-hour clock format.
Select the clock format you want and
confirm this with the
OK
sensor
button.
The display will change to the next
setting.
Setting the time
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
The time is set automatically when a
connection is established with a WiFi
network.
OK
12 00
11 59
10 58
13 01
14 02
Clock display
Place your finger on the number that
you want to change and move your
finger in the direction you want.
Confirm with the
OK
sensor button.
Further information will appear on the
display.
Continuing with
commissioning
Please see “1. Notes on correct
laundry care”.
You can then select a program and
load the tumble dryer as described in
“2. Loading the tumble dryer” and “3.
Selecting a program”.
The procedure for initial commissioning
is completed when a program lasting
longer than one hour has been carried
out in full.
Содержание TXR 860 WP
Страница 100: ...M Nr 11 677 050 01 en CA TXR 860 WP ...