background image

Proper use

7

This Commercial Dishwasher complies with all current local and national safety
requirements. Inappropriate use can, however, lead to personal injury and material
damage.

Read the operating instructions carefully before using the Commercial Dishwasher for
the first time. They contain important information on the safety, use, and maintenance of
the machine. You will prevent the risk of accidents and damage to the Commercial
Dishwasher. Keep these operating instructions in a safe place and pass them on to any
future user.

 

This Miele Commercial Dishwasher with its short program cycle times and powerful

cleaning performance is intended for commercial use. The Commercial Dishwasher can be
used on ships with a hull of longer than 91 ft (28 m), as well as on oil rigs.

 

This machine is designed exclusively for use as a “dishwasher” for cleaning wash items

as described in these instructions. Any other use, conversions, and modifications are not
permitted and could be dangerous. 
Miele cannot be held liable for damage resulting from incorrect or improper use or
operation.

 

This dishwasher is intended for stationary, indoor use only.

 

The special inserts are to be used for their specific purpose only.

 

This dishwasher is not suitable for cleaning medical products.

 

Persons which lack physical, sensory or mental abilities or experience with the machine

should not use it without supervision or instruction by a responsible person.

 

This Commercial Dishwasher can only be used on a ship if

– the ship’s hull is longer than 91 ft (28 m)

– the list of the vessel is not more than 2°.

– any external vibration is no more than 150 Hz at an amplitude of 1/64" (0.35 mm).

The safe operation and correct functioning of the Commercial Dishwasher can only be
guaranteed if the above conditions are met.

 

The door of the Commercial Dishwasher must not be opened during operation.

 

Inappropriate use can lead to water leakage.

 

The Commercial Dishwasher may not be operated on an open deck.

Содержание PG 8056





























































































































Отзывы: