Operation
47
Setting the
dispensing
concentration
For information about setting the dispensing concentration, see
“Additional settings/Additional functions/Dispensing systems”.
Refilling or
changing
containers
The dispenser module is equipped with a level monitoring indicator
which shows a message in the display when the level drops below
the minimum.
K
OK
Refill DOS
As soon as the message appears in the display, refill or replace the
container with a full one containing the appropriate process
chemical at the end of the program.
Confirm the message shown with the
OK
button.
Replace the container in time to prevent the dispensing system
from being emptied completely.
An empty dispensing system must be vented before the next
program is started.
Place the container on the open dishwasher door or on a surface
which is easy to clean.
Unscrew and remove the suction wand. Place the suction wand on
the open wash cabinet door.
Replace the empty container with a full one.
Push the suction wand into the opening of the container and screw
it on tightly. Observe the color coding.
Wipe up any spilled process chemical thoroughly.
Place the container on the floor beside the Commercial Dishwasher
or in an adjacent cabinet. The container must be at the same level
as the machine and not be placed on top of or above the machine.
The dispensing system must then be vented.
