Miele PG 8056 Скачать руководство пользователя страница 102

Страница: 102 / 124

Frequently asked questions

102

Door

Problem

Possible cause and solution

The door opens again after
being closed.

If the door is closed with too much force, the comfort door
lock will open it again.



Guide the door into the door lock with less force.

Warning! Cabinet hot. Open
anyway?

When the



button is pressed, the temperature in the

wash cabinet is over 158°F (70°C).



When the door is opened, hot steam and process

chemicals can escape!



Open the door only when necessary.

Door blocked

Protruding items are blocking the door.



Arrange the wash load so that no items project into the
door area.



Close the door.

The Comfort Door Lock is jammed.



Carefully attempt (without force) to pull the door open by
the door handle.

If the door is still jammed:



Open the door using the emergency release.



Close the door and attempt to open it again using the



button.

If the door remains jammed:



Contact Miele Service.

Obstruction sensor

This is not a fault!
The door is engaged in the catch while the locking
mechanism moves back into its closed position.



Open the door and wait until the locking mechanism
reaches its final closed position.

Содержание PG 8056





























































































































Результаты поиска

Содержание PG 8056

Отзывы:

Похожие инструкции для PG 8056

Бренды по названию

Популярные бренды

Miele PG 8056, Руководство по эксплуатации

Результаты поиска

Содержание PG 8056

Отзывы:

Похожие инструкции для PG 8056

Бренды по названию

Популярные бренды