Miele PDR 908 EL, Инструкции по эксплуатации и монтажу

Страница: 89 / 96

Supervisor level
89
Wi-Fi
Control the networking of your tumble
dryer.
– Setup
This message only appears if the
tumble dryer has not yet been
connected to a Wi-Fi network.
– Deactivate (visible when the network
is activated)
The network remains set up; the Wi-
Fi function is switched off.
– Activate (visible when the network is
deactivated)
The Wi-Fi function is reactivated.
– Connection status (visible when the
network is activated)
The following values are displayed:
– the quality of Wi-Fi reception
– the network name
– the IP address
– Reset (visible if set up)
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
– Reset (visible if set up)
The network is no longer set up. To
use the network again, a new
connection must be established.
– The Wi-Fi is switched off.
– The Wi-Fi connection will be reset
to the factory default setting.
Network time
The date and time can be
synchronised via the network.
– Off
The date and time are not
synchronised via the network.
– as a master
The machines are in a network but
are not connected to the internet.
One machine is declared as the
master and sends data to the
slave
devices.
– as a slave
The machines are in a network with
internet connection. All machines are
configured as
slaves . Data is
synchronised over the internet.