Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
64
Installation
Ensure that no lockable door, sliding
door or a door hinged in the opposite
direction is installed in the pivoting
range of the dryer door.
Levelling the dryer
The appliance must stand perfectly
level on all four feet to ensure safe and
proper operation.
The screw feet can be adjusted to
compensate for unevenness in the floor.
This tumble dryer is not suitable for
building under.
Never block the ventilation slots on
the tumble dryer. Do not block the
gap between the bottom of the
tumble dryer and the floor with plinth
boards, deep pile carpet etc. which
could obstruct the openings. This
would hinder a sufficient flow of air
to the tumble dryer.
Damage caused by incorrectly
installed or missing ducting.
Moist air from the dryer can cause
damage in the room where the
appliance is installed.
Please observe the instructions in
“Installation of the ducting”.
External control equipment
The XCI box accessory is needed to
connect external control equipment
(such as payment systems, dispensing
systems or peak load control units).
Payment system
The dryer can be fitted with a payment
system (optional accessory). This must
be connected and programmed by a
Miele Professional Service technician.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.
Содержание PDR 908 EL
Страница 96: ...M Nr 11 226 810 02 en AU NZ PDR 908 EL ...