Using for the first time
25
Reference to external
appliances
A reference to external hardware
appears.
Confirm with the
OK
sensor.
If external devices will be connected,
connect an XCI box or slide a
communication module into the slot
on the back of the tumble dryer before
the initial commissioning. The dryer
must be disconnected from the power
supply for this process. Then start the
commissioning process.
Setting the display brightness
You will be asked to set the brightness
of the display.
OK
Display brightness
Darker
Brighter
Touch the segment bar until you
reach the required level of brightness.
The selected brightness level will be
highlighted in orange.
Confirm with
OK
.
The display will change to the next
setting.
Setting the date
OK
Date
21
22
24
25
2021
2020
2019
23
July
August
September
June
May
2018
Place your finger on the number to be
changed and move your finger in the
desired direction.
When all values have been set,
confirm with the
OK
sensor.
The display will change to the next
setting.
Содержание PDR 908 EL
Страница 96: ...M Nr 11 226 810 02 en AU NZ PDR 908 EL ...