Warning and Safety instructions
17
WARNING:
Never switch the tumble dryer off before the end of
the drying programme unless all items are removed immediately and
spread out to cool down.
Fire hazard!
This tumble dryer must not be connected to a controllable socket
(e.g. a timer or a peak-load switch-off device).
The tumble dryer may only be operated with a peak-load device if
this is connected to the tumble dryer via the Miele XCI box and the
relevant settings have been configured on the tumble dryer.
There is a risk of the laundry self-igniting if the drying programme is
cancelled before the cooling phase has finished.
To prevent the risk of fire, the following textiles must never be
dried in the tumble dryer:
– Items which have been cleaned using industrial chemicals (e.g.
professional dry-cleaning agents).
– Fabrics which contain a large proportion of rubber, foam rubber or
rubber-like materials. For example, products made from latex
foam rubber, shower caps, waterproof textiles, rubberised articles
and items of clothing and pillows with foam rubber filling.
– Fabrics which contain padding or fillings which are damaged (e.g.
pillows, jackets). The filling could fall out and cause a fire.
The programme finishes when the cooling phase has been
completed. Many programmes are followed by a cooling phase to
ensure that the items are not too hot to handle when you remove
them (this also reduces the risk of the laundry self-igniting).
Make sure that you do not remove the laundry until the programme
has finished.
Fabric softener and similar products must be used according to
the instructions on the manufacturer's packaging.
Do not store or use petrol, kerosene, paraffin or other flammable
substances near the dryer. Risk of fire and explosion!
Содержание PDR 908 EL
Страница 96: ...M Nr 11 226 810 02 en AU NZ PDR 908 EL ...
