Miele KWT 2601 SF страница 77 Скачать руководство пользователя

Страница: 77 / 92

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

To prevent cold from escaping, open the appliance doors as little as possible un-
til the fault has been corrected.

Problem

Possible cause and solution

If you are concerned
that your appliance is
not working properly,
you can perform a

Self

Test

. Your appliance will

be checked for any
faults or malfunctions.

Any errors identified during the Self Test are shown on
the display.



Perform a Self Test (see “Additional settings”, sec-
tion “Performing a

Self Test



”).



Contact Technical Service and inform them of the
error message(s) on the display.

The Wine Storage Unit
is not getting cold and
the interior lighting
does not come on when
the appliance door is
opened.

The Wine Storage Unit is not switched on.



Switch the Wine Storage Unit on. The temperature
appears in the display.

The plug is not properly plugged into the electrical
outlet.



Insert the plug into the outlet.

The fuse has tripped. There could be a fault with the
Wine Storage Unit, the household electrical wiring, or
another appliance.



Contact a technician or the Technical Service de-
partment.

Содержание KWT 2601 SF





























































































Результаты поиска

Содержание KWT 2601 SF

Отзывы:

Похожие инструкции для KWT 2601 SF

Бренды по названию

Популярные бренды

Miele KWT 2601 SF, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 2601 SF

Отзывы:

Похожие инструкции для KWT 2601 SF

Бренды по названию

Популярные бренды