Miele KWT 2601 SF Скачать руководство пользователя

Страница: 62 / 92

Selecting additional settings

Switching the ambient light-
ing



on or off

The interior lighting can be set to re-
main on when the appliance door is
closed so your wines can be on display
at all times.

Each wine conditioning zone has its
own light so that your Wine Storage
Unit is lit up to maximum effect.



Touch the



sensor on the display

so that it is highlighted in color.



Close the door.

The interior lighting now remains on
even when the door is closed.



To switch the ambient lighting off,
touch the



sensor so that it is no

longer highlighted in color.

The interior lighting is now switched off
when the appliance door is closed.

Selecting the intensity of the
Ambient Lighting



You can set the intensity of the

Ambient

Lighting

in settings mode



You can also choose the wine condi-
tioning zones in which the

Ambient Light-

ing

should be switched on.



In settings mode



, use the



and



arrow buttons to select

Ambient

Lighting

and select

to confirm your

selection.



Use the



and



arrow buttons to

select the correct setting (

Ambience 1

–

Ambience 5)

–

Ambience 1

–

Ambience 3

Weak to strong lighting in all wine
conditioning zones

–

Ambience 4

Only the lighting in the wine condi-
tioning zone in the center is switched
on

–

Ambience 5

The lighting in the wine conditioning
zone in the center is stronger than
the lighting in the top and bottom
wine conditioning zones.



Confirm your selection with



Close the door.

The ambient lighting is set as per your
selections.

Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.

Содержание KWT 2601 SF





























































































Результаты поиска

Содержание KWT 2601 SF

Отзывы:

Похожие инструкции для KWT 2601 SF

Бренды по названию

Популярные бренды

Miele KWT 2601 SF, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 2601 SF

Отзывы:

Похожие инструкции для KWT 2601 SF

Бренды по названию

Популярные бренды