Miele KMDA 7774-1 Скачать руководство пользователя страница 58

Страница: 58 / 96

Problem solving guide

Problem

Cause and remedy



flashes alternately

with numbers in the
timer display.



The overheating protection mechanism has been ac-
tivated.



See “Safety features”.







The fan is blocked or defective.



Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.



If this fault code continues to appear in the dis-
play, contact Miele Service.



and other numbers

There is a fault in the electronic module.



Interrupt the power supply to the hob for approx.
1 minute.



If the problem persists after power has been re-
stored, please contact Miele Service.

Liquid has got into the
cooker hood.

Due to boiling over or spillage, liquid has made its
way through the extraction grille into the cooker hood.
The base of the grease filter can hold approx. 250 ml
of liquid. The drip tray underneath the housing can
hold a further 250 ml of liquid.



Switch the cooker hood off.



Clean the grease filter, the drip tray and the inside
of the housing (see “Cleaning and care”).

Extraction performance
has decreased. Extrac-
tion noise has in-
creased.

Objects (e.g. a cloth) have been drawn into the cooker
hood.



Switch the cooker hood off.



Remove the grease filter (see “Cleaning and care”).



Remove any objects from the grease filter.

Содержание KMDA 7774-1

































































































Результаты поиска

Содержание KMDA 7774-1

Отзывы:

Похожие инструкции для KMDA 7774-1

Бренды по названию

Популярные бренды

Miele KMDA 7774-1, Эксплуатация и установка

Результаты поиска

Содержание KMDA 7774-1

Отзывы:

Похожие инструкции для KMDA 7774-1

Бренды по названию

Популярные бренды