Miele KMDA 7774-1 Скачать руководство пользователя страница 54

Страница: 54 / 96

Cleaning and care

Cooker hood drip tray

Clean the drip tray if liquid from food
being spilled or boiling over has got into
the cooker hood.



Remove and clean the grease filter as
described in “Cleaning and care”
–“Grease filter/Extraction grille”.



Hold the drip tray securely and open
the 4 catches (2 on the right and 2 on
the left). Carefully remove the tray
from the casing, making sure it is
kept horizontal.



Pour out the liquid.



Clean and dry the drip tray.



Also clean and dry accessible areas
inside of the cooker hood.



Fasten the drip tray back onto the
casing.



Replace the grease filter and replace
the extraction grille.

Internal surfaces of the cooker
hood



Whilst the grease filter is removed re-
move any grease deposits from all
accessible areas of the housing Do-
ing so will prevent a fire hazard.

Resetting the grease filter op-
erating hours counter

After cleaning the grease filter, the oper-
ating hours counter needs to be reset.



Touch the



sensor for 3 seconds.

The sensor will go out.

Reactivating charcoal filter

The charcoal filter needs to be reactiv-
ated after 120 operating hours. The



sensor will light up.



Reactivate the charcoal filter as de-
scribed in the operating instructions
supplied with the recirculation box.

Resetting the charcoal filter
operating hours counter



Touch the



sensor for 3 seconds.

The sensor will go out.

Содержание KMDA 7774-1

































































































Результаты поиска

Содержание KMDA 7774-1

Отзывы:

Похожие инструкции для KMDA 7774-1

Бренды по названию

Популярные бренды

Miele KMDA 7774-1, Эксплуатация и установка

Результаты поиска

Содержание KMDA 7774-1

Отзывы:

Похожие инструкции для KMDA 7774-1

Бренды по названию

Популярные бренды