Miele KM 3034 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 64

background image

Warning and Safety instructions

9



The manufacturer's warranty will be invalidated if the appliance is

not repaired by a Miele authorised service technician.



Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.



The cooktop is not intended for use with an external timer switch

or a remote control system.



The connection to the gas supply must be carried out by a

suitably qualified gas fitter (see “Installation - Gas connection”). If the
plug has been removed from the connection cable or or the
connection cable is not supplied with a plug, the cooktop must be
connected to the electricity supply by a suitably qualified electrician
(see “Installation – Electrical connection”).



If the mains connection cable is damaged, it must be replaced

with a special mains connection cable, available from Miele, by a
Miele authorised service technician or suitably qualified and
competent electrician in order to avoid a hazard (see “Installation -
Electrical connection”).



During installation, maintenance and repair work, the appliance

must be completely disconnected from the mains electricity supply.
The gas supply must also be turned off. It is only completely isolated
from the gas and electricity supply when:

– the mains circuit breaker is switched off, or

– it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

– the gas inlet valve is closed.

«
...
7
8
9
10
11
...
»

Содержание KM 3034

































































Отзывы:

Нет отзывов

Похожие инструкции для KM 3034

Induction cooktop

Бренд: Saladmaster Страницы: 16

Бренд: Inalto Страницы: 20

Бренд: Bibby Sterilin Страницы: 24

Бренд: Philco Страницы: 56

Бренд: Omcan Страницы: 20

Бренд: EUROCHEF Страницы: 15

Бренд: Signature Kitchen Suite Страницы: 140

Бренд: Jenn-Air Страницы: 6

Бренд: Westinghouse Страницы: 9

Novy Up Comfort 40 00 Series

Бренд: Novy Страницы: 32

Бренд: Wolf Страницы: 2

Бренд: DCS Страницы: 48

Бренд: Sunpentown Страницы: 5

Бренд: Candy Страницы: 102

Бренд: Insignia Страницы: 24

Бренд: newchef Страницы: 82

Бренд: Tatung Страницы: 15

Бренд: Omega Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды