Making ice cubes
69
Check and pay attention to the
following before switching the ice cube
maker on:
- The ice cube maker must be clean.
- The refrigeration appliance must be
switched on.
- The ice cube drawer contains an
adjustable partition. You can adjust
the size of the area in which the ice
cubes will collect depending on the
amount of ice you require.
- The drawer area below the ice cube
maker must be empty.
- Ice cubes can only be made when
the ice cube drawer is completely
closed.
Risk to health due to
contaminated water.
Bacteria can develop in water which
has been sitting in the water supply
lines for too long. This poses a risk to
your health.
Throw away the first 3 batches of ice
cubes made after the ice cube maker
is started up, as the water will have
been used for the initial rinsing of the
water supply line.
This applies to the initial
commissioning as well as when
using the ice cube maker again after
it has been switched off for an
extended period of time (more than
5 days).
When using the appliance for the first
time, it can take up to 24 hours for the
first ice cubes to drop out of the ice
cube maker and collect in the drawer.
After the ice cube maker has been
switched off and on again, this
process lasts max. 6 hours.
Only make normal domestic quantities
of ice cubes with the ice cube maker.
The ice cube maker can make up to
approx. 1.2 kg of ice cubes in
24 hours.
The amount of ice cubes made by the
appliance depends on the temperature
in the freezer zone.
The lower the
temperature, the more ice cubes
are produced.
Switching the ice cube
maker
on/off
Tap
.
Swipe left or right until
is shown in
the middle.
Tap
.
will light up orange when the ice
cube maker is switched on.
Once the freezer zone has cooled down
to its set temperature, the ice cube
maker will fill with water.
Содержание KFNS 7795 D
