Problem solving guide
92
Message
Possible cause and remedy
lights up red in the
display and an alarm
also sounds.
Indication of an interruption to the power supply: the
temperature in the freezer section over the last few
days or hours has risen too high because of a power
cut or interruption to the power supply.
Tap
.
The fault message is confirmed:
goes out and the alarm will stop.
The warmest temperature recorded in the freezer
section will flash for about 1 minute in the
temperature display for the freezer section. Then the
temperature display will change to the current
temperature in the freezer section.
You can exit the flashing temperature display early:
Touch the temperature display for the freezer
section.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer. The appliance will operate at the last
temperature setting when the power is restored.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Содержание KFNS 7795 D
