Installation
*INSTALLATION*
77
Z: depth adjustment
Check the distance between the cabi-
net door and the housing unit. A dis-
tance of approximately 1/16" (2 mm) is
required.
Undo screws
and
.
Tighten all the screws again.
Replace the top covers
and click
them into place.
Close the covers on the securing
brackets.
The appliance is properly installed in
the niche if:
– The doors close properly.
– The doors are not sitting against the
cabinet carcase.
– The seal on the top corner of the
handle side is firmly seated.
To check this, place a lamp that is
switched on inside the appliance and
close the appliance doors.
Make the room dark and then check
whether you can see light shining out
from the sides of the appliance. If so,
go back and check the individual in-
stallation steps.
Содержание KFN 37232 iD
Страница 80: ......
Страница 81: ......
Страница 82: ......
Страница 84: ...M Nr 11 448 470 00 en US CA KFN 37232 iD ...