Miele KFN 37232 iD страница 69 Скачать руководство пользователя | Manualshive

Страница: 69 / 84

background image

Installation

*INSTALLATION*

69



Carefully remove the protective film
from the sealing strip



.



Stick the sealing strip



onto the

side of the appliance on which the
door will open, flush with the front.

1. Align the sealing strip with the bot-

tom edge of the top fixing bracket.

2. Stick it down along its entire length.

Building in the appliance

If the appliance is pushed too far into
the niche, the appliance door may
not close properly once the cabinet
door has been fitted. This can cause
ice to build up, condensate to accu-
mulate, and cause the appliance to
malfunction. These can all lead to in-
creased energy consumption.
Push the appliance into the built-in
niche, making sure a gap of

1 5/8" (42 mm)

is maintained all

around between the appliance cas-
ing and the front of the cabinet side
walls.



Now push the appliance into the
niche until all fixing brackets at the
top and bottom are touching the front
edge of the cabinet side wall.

–



5/8" (16 mm) thick walls:

The spacers should touch the front
edge of the cabinet side walls at the
top and bottom.

–



3/4" (19 mm) thick walls:

The front edges of the top and bot-
tom hinges should be flush with the
front edge of the cabinet side wall.

This ensures a distance of

1 5/8" (42 mm)

to the front edges of the

cabinet unit side walls all the way
round.

«
...
67
68
69
70
71
...
»

Содержание KFN 37232 iD





















































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 37232 iD

Бренд: NEFF Страницы: 17

Бренд: Jenn-Air Страницы: 60

Бренд: McCall Страницы: 2

Бренд: SEVERIN Страницы: 48

Silhouette Select SSBC056D1B

Бренд: Danby Страницы: 28

Бренд: Elkay Страницы: 2

Бренд: Continental Refrigerator Страницы: 2

BR22TW-P1196709WW

Бренд: Amana Страницы: 54

Бренд: Impecca Страницы: 37

Бренд: Indesit Страницы: 16

Бренд: Koncar Страницы: 84

Бренд: Cylinda Страницы: 32

Бренд: Indesit Страницы: 12

Бренд: Haier Страницы: 36

Бренд: Haier Страницы: 81

Бренд: Haier Страницы: 116

Бренд: Haier Страницы: 31

Бренд: U-Line Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды