manualshive.com logo in svg

Miele KFN 37232 iD, Инструкции по эксплуатации и монтажу, Страница: 27 / 84

Поделиться
Скачать
Miele KFN 37232 iD Скачать руководство пользователя страница 27

Temperature and door alarm

27

Your appliance is equipped with a warn-
ing system to ensure that temperature
increases in the freezer section do not
go unnoticed and also prevents energy
from being wasted when a door is left
open.

Temperature alarm

If the temperature in the freezer section
becomes too warm, the bottom temper-
ature display and the alarm symbol 

will flash. An alarm will also sound.

The temperature the appliance is set at
determines the temperature the appli-
ance recognizes as being too warm.

The audio and visual signals are trig-
gered, for example:

– when the appliance is switched on if

the temperature in the appliance dif-
fers greatly from the set temperature,

– if a lot of room air enters the freezer

when food is being loaded, rear-
ranged or taken out,

– when freezing large amounts of food

at once,

– when freezing fresh food which is still

warm,

– when there is a loss of power,

– if the appliance has a fault.

The alarm will stop, the temperature
display will light up constantly again
and the alarm symbol 

 will go out as

soon as the temperature has dropped
to the correct level again.

if the temperature in the freezer

remains above 0 °F (-18 °C) for a
long time, check that the frozen food
has not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.

Door alarm

The alarm will sound if a door is left
open for more than 180 seconds.

As soon as the door is closed, the
alarm sound will stop.

Turning off the acoustic alarm

If the acoustic alarm disturbs you, it can
be switched off.

Touch the alarm off button.

The alarm will stop. 
If the alarm is due to the temperature
rising, the alarm symbol 

 will stay on

until the set temperature has been
reached.

Содержание KFN 37232 iD





















































































Отзывы:

Нет отзывов