Miele KFN 37232 iD Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 84

Miele KFN 37232 iD Скачать руководство пользователя страница 43

Cleaning and care

43

Cleaning the interior and ac-
cessories

Clean the appliance at least once a
month.
Clean up any spills, stains or food
immediately. Do not allow them to
dry and stick to the appliance.



Clean the interior with lukewarm wa-
ter and liquid dish soap applied with
a soft sponge. After cleaning, wipe
with a clean, damp cloth and then dry
with a soft cloth.

The stainless steel trim on the ad-
justable shelves is

not suitable

for

cleaning in a dishwasher.
Remove the stainless steel trim and
strips before putting the shelves into
the dishwasher.

The following parts

cannot be cleaned

in a dishwasher

:

– the stainless steel trim

– the protective strips at the back of

the adjustable shelves

– all drawers and drawer lids (depend-

ing on model)



Clean these parts by hand.

The following parts

are suitable

for

cleaning in a dishwasher:

The maximum temperature of the
dishwashing program selected must
not exceed 131°F (55°C).

Contact with natural dyes from car-
rots, tomatoes and ketchup etc. may
discolor the plastic parts in the dish-
washer.
This discoloration does not affect the
stability of the parts.

– the bottle holder, egg tray, ice cube

tray (depending on model)

– the shelves and bottle shelf in the

door

– the adjustable shelves (with the trim

and strips removed)



Clean the condensate channel and
drain opening more frequently using a
cotton swab, or similar, so that con-
densate can drain away unob-
structed.



Leave the door open to air the appli-
ance for a short while and to prevent
odors building up.

«
...
41
42
43
44
45
...
»

Содержание KFN 37232 iD





















































































Отзывы:

Нет отзывов