Miele KFN 37232 iD Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 84

Miele KFN 37232 iD Скачать руководство пользователя страница 47

Frequently Asked Questions

47

Problem

Possible cause and solution

The compressor comes
on less and less often
and for shorter periods
of time. The tempera-
ture in the appliance
rises.

This is not a fault. The temperature setting is too
high.



Correct the temperature setting.



Check the temperature again after 24 hours.

The food begins to thaw.
The ambient temperature is too low for this appli-
ance.
If the ambient temperature is too low, the compres-
sor will run less frequently. This may cause the
freezer to become too warm.



See the information in the section on “Installation –
Installation location”.



Increase the ambient temperature.

An LED indicator light is
flashing at the back of
the refrigerator at the
bottom near the com-
pressor (depending on
model).
The electronic for the
compressor is equipped
with an operation and
fault diagnosis LED in-
dicator light.

The indicator light flashes several times every 5 sec-
onds.
A fault has occurred.



Contact Customer Service.

The indicator light flashes regularly every 15 sec-
onds.
This is not a fault. This flashing is normal.

The door seal is dam-
aged and needs to be
replaced.

No tools are required to change the door seal.



Contact Miele Service.

Ice or condensation has
built up inside the appli-
ance.

The door seal has come out of its groove.



Check that the door seal is correctly positioned in
the groove.

The door seal is damaged.



Check whether the door seal is damaged.

«
...
45
46
47
48
49
...
»

Содержание KFN 37232 iD





















































































Отзывы:

Нет отзывов