Frequently Asked Questions
48
Messages in the display
Message
Possible cause and solution
The
symbol lights up
in the display. You can-
not switch the appli-
ance off.
The
safety lock
has been activated.
Completely deactivate the safety lock (see “Select-
ing additional settings”, section “Activating and de-
activating the safety lock”).
The alarm symbol
and the temperature
display are flashing.
The temperature in the appliance is too warm.
For instance, this could be due to:
– the door being opened too frequently,
– a large quantity of fresh food has been placed in
the freezer at once without turning on the Su-
perFreeze function.
– a lengthy interruption to the power supply.
Rectify the cause of the alarm.
The alarm will stop and the alarm symbol
will go
out when the temperature reaches the correct level
again.
Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.
The
symbol lights up
in the display, the appli-
ance does not get cold,
although the controls
and the interior lighting
are working.
Demo mode is switched on. This allows the appli-
ance to be presented in the showroom without the
cooling system being switched on. Do not activate
this setting for domestic use.
Contact Miele Technical Service for information on
deactivating Demo mode.
“
F0
to
F9
” appears in
the display.
There is a fault.
Contact Miele Technical Service.
Содержание KFN 37232 iD
Страница 80: ......
Страница 81: ......
Страница 82: ......
Страница 84: ...M Nr 11 448 470 00 en US CA KFN 37232 iD ...